Rooftop Route-Zone Qualification Planner

Select every zone crossed by the proposed DC route. The comparison assigns questions and evidence owners; it does not approve a wiring method or replace the engineer and authority having jurisdiction.

✓ Under-module or exposed roof run Owner: cable evidence plus route design ✓ Supported rail or tray Owner: support evidence plus route design ✓ Conduit or protected section Owner: design rules plus installer method ✓ Roof-to-building entry Owner: project design plus building requirements ✓ Inverter-side transition Owner: equipment instructions plus cable specification ✓ Connector and termination interface Owner: connector instructions plus installer acceptance

No route zone selected

0 of 6 zone types selected

Comparison list

Zone	Carry into review
Mark every route zone shown on the drawing.
Under-module or exposed roof run	Exposure, contact points, support, protection, access and cable evidence.
Supported rail or tray	Support product, material, edge profile, grouping, movement and route design.
Conduit or protected section	Conduit, fill, wet condition, grouping, pull route and installer method.
Roof-to-building entry	Transition, enclosure, penetration, indoor path, labels and building owner.
Inverter-side transition	Terminal or lug range, bend space, strain, polarity and equipment instructions.
Connector and termination interface	Both models, contact and seal ranges, tooling, assembly and inspection owner.

Attach the marked route drawing, support plan, interface data, and required evidence to the RFQ.

Request a Route-Based Review →